Signal Lever/Headlight Hi/Lo Beam - Winnebago Ultimate Advantage Owner's Manual

signal/cruise lever. Pull the switch button out-
ward from the column to activate the flashers. To
cancel flashers, push the switch button inward to-
ward the column. See also Section 3 for further
operating information.
Hazard Light Switch
Pull On/Push Off
SIGNAL LEVER/
HEADLIGHT HI/LO BEAM
The signal lever controls the turn signals,
high/low beam changing.
Turn Signals/Hi-Lo Beams
DRIVING YOUR MOTOR HOME
HEADLIGHT BEAM CHANGE
AND TURN SIGNALS
Move multi-function lever upward for right
turn signal and downward for left turn signal.
Pull end of handle toward you to switch high
beam to low, or low beam to high.
STEERING COLUMN TILT/TELESCOPE
The tilt/telescoping adjustment lever is locat-
ed on the left side of the steering column.
To Adjust Tilt Wheel: Pull the lever toward you
and tilt the steering wheel to the desired angle,
then release the lever.
Pull to Tilt
Push to Telescope
To Adjust Telescoping Column: Push the lever
toward the dash. Push or pull the steering wheel
to slide the steering column in or out to the
desired length. Release the lever to lock the col-
umn into position.
WARNING
Do not adjust the steering column or
tilt wheel while the vehicle is in
motion. This could cause a loss of
vehicle control.
SECTION 2
2-5