Programmed Stand-Alone - Martin Professional MiniMAC Wash User Manual

Hide thumbs

Table Of Contents

Table of Contents

ROGRAMMED

In Programmed Stand-alone mode the MiniMAC executes up to 7 scenes

programmed by the operator and stored in the fixture's memory.

Multiple Profiles and Washes may be connected for operation in which each fixture

(1) mimics the master fixture, (2) executes its own scenes in synchronization with

the others, or (3), using the MC-X controller, executes its own scenes with its own

fade and wait times.

Important! Automatic Stand-alone operation must be disabled when

operating in Programmed Stand-alone mode.

To connect multiple fixtures

1 Plug a data cable into the OUT socket of the first fixture and the IN socket of the next

fixture. Repeat as required to connect up to 32 MiniMAC Profiles and Washes.

2 Insert a male termination plug (P/N 91613017) into the OUT socket of the last fixture.

If you are not using an MC-X, insert a female termination plug (P/N 91613018) into

the IN socket of the first fixture.

To program a single or master fixture routine

1 Select

2 One-by-one, select effects from the

effect setting, and press [enter]. See Table 7.

3 To save a scene, scroll to

and press [enter]. A dash in the display indicates that a scene has already been

saved in the location: it will be overwritten when you press [enter].

4 Program additional scenes as desired.

5 To retrieve a scene for viewing, editing, or to use as the starting point for a new

scene, select

number and press [enter]. Press [menu] to return to the

unprogrammed scenes do not appear in the

6 To delete scenes, select

scene to delete or select

appear in the menu. Press [enter] to delete or press [menu] to escape.

TAND

Ct r

from the main menu and press [enter].

S to

G E t

from the

dEL

A LL