Automatic Stand - Alone - Martin Professional MiniMAC Wash User Manual

A
UTOMATIC
The MiniMAC provides two stand-alone modes: automatic and programmed. This
section describes Automatic Stand-alone Mode, in which random action is sound
activated, using a built-in microphone, or triggered by a timer. The pan/tilt range
and speed are adjustable and multiple fixtures may be synchronized in master/slave
configuration. Table 6 lists the options and menu settings for customizing operation.
Up to 32 Profiles and Washes may be connected together for synchronous operation
is which one fixture, the master, sends control signals to the others (slaves). They
may also be operated using the Martin MC-1 remote control, which provides the
following options:
• Independent (non-synchronized) sound-activated action at slow, medium, fast, and
random speed
• Synchronized sound-activated action
• Suspend (blackout) operation
• Momentary strobe
• Manual trigger
Important! Programmed Stand-alone operation must be disabled when
operating in Automatic Stand-alone mode.
To operate a singl e fixture
1 Scroll to
Sin
2 Scroll to
3 Modify behavior with the options in Table 6. (If the fixture does not respond as
expected, verify that Programmed Stand-alone mode is disabled, i.e., that
Ctr
4 Disconnect the fixture from power to stop operation.
5 To disable stand-alone operation, set
To operate mul tiple fixtures
Important! Set only 1 fixture as master: errors and damage can occur if
there is more than 1 device sending control signals.
S
TAND
SA
in the main menu, press [enter], scroll to
, and press [enter].
En A
, press [enter], scroll to
ru n OFF
/ is set to
Automatic Stand-alone
-
ALONE
O n A ut
or
.)
En A OFF
to
C tr
, press [enter], scroll to
, and press [enter].
.
6
23