Chasers - thomann LED Foot 8 DMX User Manual

Operating

7.3 Chasers

Saving chasers
34
1.
Keep the [Program | Record] button pressed for three seconds to change to program‐
ming mode.
ð The indicator LED [Program | Record] lights up.
2. Press [Mode].
ð The indicator LEDs [Mode] and [Chase] light up.
3.
Use [Fixture] buttons 1 to 8 to activate the devices to be integrated into the chaser.
ð The indicator LEDs of the activated control channels light.
4. Use the rotary controls [White], [Red], [Green], [Blue] and [Amber] to adjust the colour set‐
tings and the two user definable controls to adjust the assigned functions.
5.
Use the buttons and
flashes this memory slot is already in use. Assign a different memory slot or overwrite the
existing settings.
6. Press the [Program | Record] button to save the chaser.
ð All indicator LEDs flash three times briefly when the new chaser has been saved.
DMX-controller
to select a memory slot ( 'CS.01' ... 'CS.16' ). If the indicator value