Starting Up - thomann LED Foot 8 DMX User Manual

Starting up

4 Starting up
Installing the device
Connecting the PSU
Turning the unit on
14
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
The device is designed for floor use. Position the unit on a flat, non-slip surface, use a non-slip
pad if necessary.
Connect the included 9V power supply unit to the power supply input of the unit and then
plug the power cord plug into the wall outlet.
When all cable connections are made, turn on the device with the main switch on the rear
panel. The display briefly shows 'Load' , the unit is instantly operational.
DMX-controller