Scenes - thomann LED Foot 8 DMX User Manual

7.2 Scenes

Saving scenes
1.
Keep the [Program | Record] button pressed for three seconds to change to program‐
ming mode.
ð The indicator LED [Program | Record] lights up.
2. Use [Fixture] buttons 1 to 8 to activate the devices to be integrated into the scene.
ð The indicator LEDs of the activated control channels light.
3.
Use the rotary controls [White], [Red], [Green], [Blue] and [Amber] to adjust the colour set‐
tings and the two user definable controls to adjust the assigned functions.
4.
Use the buttons and
flashes this memory slot is already in use. Assign a different memory slot or overwrite the
existing settings.
5.
Press the [Program | Record] button to save the scene.
ð All indicator LEDs flash three times briefly when the new scene has been saved.
6. Repeat steps 2 to 5 to save additional scenes.
A maximum of 16 scenes can be saved in the device.
LED Foot 8 DMX
to select a memory slot ( 'Sc.01' ... 'Sc.16' ). If the indicator value
Operating
31