Removing The Top Cabinet (For Er-A310 & Er-A330) - Sharp ER-A310 Installation Manual

CHAPTER 3. REMOVING THE TOP
CABINET (For
ER-A310 & ER-A330)
1. ER-A310
1) Remove the printer cover 1
2) Remove the two screws 2
3) Remove the screw 3 and grounding wire
1
2
4) Separate the top cabinet and the drawer unit.
Note: Transformer cable 5
unit are connected to the main PWB on the top cabinet. Be
careful when separating them from the drawer unit.
.
.
4 .
2
3
and the drawer cable on the drawer
5) Remove transformer cable
PWB.
4
– 2 –
5 and drawer cable
5
6 from the main
6