General; List Of Options - Sharp ER-A310 Installation Manual

CHAPTER 1. GENERAL
This manual describes the ER-A310/A330 disassembly procedures
and the option attachment procedures. For assembly procedures,
reverse the disassembly procedures. For attachment of options which
do not require special descriptions, descriptions are omitted.
Note for operations
•
Before operation, ground the operator's body and perform other
necessary measure against static electricity.
•
During operations, disconnect the AC cord from the outlet.
•
After completion of operations, connect the connectors.
•
After completion of operations, be sure to perform the master
reset.
CHAPTER 2. LIST OF OPTIONS
1. Sales options
No. NAME
1 REMOTE DRAWER
2 COIN CASE
3 COIN CASE COVER
4 KEY TOP KIT
2. Service options
No. NAME
1 SRV KEY
2 MODE KEYGRIP COVER
3 DRIP-PROOF KEYBOARD COVER
4 DRIP-PROOF MODE SWITCH COVER
5 SHIELD PLATE KIT
6 ONE HOLE CASHIER KEY KIT
7 DRAWER FIXING KIT
3. Supplies
No. NAME
1 ROLL PAPER
2 INK ROLLER (ER-A310)
3 INK ROLLER (ER-A330)
4 INK FOR STAMP
MODEL DESCRIPTIONS
ER-04DW 5B/8C
ER-58CC 5B/8C
ER-03CV
1 × 1 key top
ER-11KT7
1 × 2 key top
ER-12KT7
2 × 2 key top
ER-22KT7
1 × 1 dummy key
ER-11DK7
5 × 1 dummy key
ER-51DK7
LKGIM7113RCZZ
LKGIM7126RCZZ
GCÇVH7126BHZZ
GCÇVH7127BHZZ
DKIT-8666BHZZ
DKIT-8669BHZZ
DUNT-8670BHZZ
DPAPR1006CSZZ
NRÇLR6652RCZZ
NRÇLR6638RCZZ
UINK-1001CCZZ
Master reset (All memory clear)
There are two possible methods to perform a master reset.
•
MRS-1
Used to clear all memory contents and return machine back to its
initial settings. return keyboard back to default. for default keyboard
layout.
Procedure-1 (with SRV key)
1) Unplug the AC cord from the wall outlet.
2) Set the MODE switch to the (SRV') position.
3) Plug in the AC cord to the wall outlet.
4) While holding down JOURNAL FEED key, turn to (SRV) position
from (SRV') position.
Procedure-2 (without SRV key)
1) Turn the mode switch to the (REG) position.
2) Ensure the batteries are not installed in the battery compartment
and insert the plug into the outlet.
3) The right most decimal point will blink for a few seconds.
4) The register will sound three beeps.
5) The register will display "
PARTS CODE PRICE RANK
AK
AL
BE
BA
BL
BT
AT
PARTS CODE PRICE RANK
AR
AZ
AY
AK
– 1 –
."
DESCRIPTIONS
OP key only
Only for ER-A330
Only for ER-A330
DESCRIPTIONS