Table of Contents
Advertisement
7
Troubleshooting
Camera problems
Status
The camera does not
turn on
The camera does not
turn off and the lens
does not retract
Camera buttons and
controls do not function
The camera screen does
not turn on
In Review, a blue or
black screen is displayed
instead of a picture
The pictures remaining
number does not
decrease after taking a
picture
Picture orientation is not
accurate
Flash does not fire
www.kodak.com/go/support
Cause
■
Remove, then reinsert the battery.
■
Insert a charged battery.
■
Place the camera on a Kodak EasyShare camera or printer dock
(sold separately), then try again.
■
Connect the camera to a Kodak 5-volt AC adapter (sold
separately), then try again.
See
page 57
for more battery information.
■
In any capture mode, press the Display/Info button.
■
Turn the camera off, then on again.
To change the camera screen setting so that it is on whenever the
camera is on, see
Liveview (Auto), page
■
Transfer the picture to the computer.
■
Transfer all pictures to the computer.
See
page
43.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Set the Orientation Sensor
■
Check flash setting, and change as needed
31.
(page
33).
(page
16).
48
Hide quick links:
Advertisement
Table of Contents
