Kodak EASYSHARE Z1085 IS Extended User Manual page 56

Troubleshooting
If
Camera does not
recognize
SD/SDHC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.
Camera ready light status
If
Ready light does
not turn on and the
camera does not
work.
Ready light blinks
green.
Ready light blinks
amber.
Ready light blinks
red and camera
turns off.
50
Try one or more of the following
■
Purchase a certified SD/SDHC card.
■
Format the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■
Insert a card into the slot, then push to seat
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
■
Insert a new card
page 44), or delete pictures
■
Transfer pictures to the computer
or internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Try one or more of the following
■
Turn on the camera
■
Install new batteries
■
Turn camera off, then back on.
■
Camera is operating normally.
■
Wait. Resume picture taking when the light stops blinking and turns
green.
■
Install new batteries
(see page 33).
(see page 3), transfer pictures to the computer
(see page
(see page
(see page 33).
(see page 2).
(see page 1) or charge rechargeable batteries.
(see page 1) or charge rechargeable batteries.
www.kodak.com/go/support
(see page 3).
15).
44), then format the card
(see