Using The Flash - Kodak EASYSHARE Z1085 IS Extended User Manual

Zoom digital camera
Hide thumbs Also See for EASYSHARE Z1085 IS:
Table of Contents

Advertisement

Using the flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash settings are limited in some capture modes.
Flash modes Flash fires
Auto When the lighting conditions require it.
Off
Never.
Every time you take a picture, regardless of the lighting conditions. Use when
the subject is in shadow or is "backlit" (when the light is behind the subject).
Fill
In low light, hold the camera steady or use a tripod.
NOTE: (Not available in Smart Capture mode.)
If Red-eye Pre-flash is turned off (in
the Setup menu): the flash fires
Red-
once and the camera automatically
eye
corrects red-eye in the picture.
To turn the Red-eye Pre-flash feature on/off,
Flash-to-subject distance in Smart Capture mode
Wide angle 26.9 ft (8.2 m)
Telephoto 14.4 ft (4.4 m)
www.kodak.com/go/support
Press the
button repeatedly to scroll
through flash modes. (See flash modes below.)
Taking pictures/videos
If Red-eye Pre-flash is turned on (in the
Setup menu): the flash fires once so the
eyes become accustomed to the flash, then
fires again when the picture is taken.
see page
31.
9

Advertisement

Table of Contents
loading

Table of Contents