Using The Framing Marks To Take Pictures - Kodak EASYSHARE Z1085 IS Extended User Manual

Reviewing the picture/video just taken
After you take a picture/video, the LCD displays a quickview for several seconds. (To
dismiss the quickview sooner, press the Shutter button halfway.)
The picture is saved
unless you press
the Delete button.
To review pictures/videos anytime, see

Using the framing marks to take pictures

Framing marks indicate the camera focus area. The camera attempts to focus on
foreground subjects, even if they're not centered in the scene.
1 Press the Shutter button halfway.
When the subject is in focus, the framing marks turn green. If the camera is not
focusing on the desired subject (or if the framing marks disappear), release the Shutter
button and recompose the scene.
2 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in some SCN (scene) and Video modes. When you use AF Zone and
set Center Zone, the framing marks are fixed at Center Wide.
www.kodak.com/go/support
Delete
Play a video
page 13.
Taking pictures/videos
5