Replacing Or Upgrading The Hard Drive; Removing The Hard Drive - HP probook 430 G2 User Manual

2. Tighten the service door screw (2) to secure the service door.
3. Insert the battery (see

Replacing or upgrading the hard drive

CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.
Then shut down the computer through the operating system.

Removing the hard drive

To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the battery (see
5. Remove the service door (see
6. Loosen the 4 hard drive screws (1).
7. Slide the hard drive (2) away from the center of the computer to disengage it from the connector.
50 Chapter 8 Drives
Inserting a battery on page
To prevent information loss or an unresponsive system:
Removing a battery on page
Removing the service door on page
41).
41).
49).