Garmin GNS 480 Installation Manaul page 195

APPENDIX F –
F.1 CDI/HSI S
A CDI/HSI Source Selection Annunciator may be required for some installations – refer to 2.5.3.2 for
additional information describing when a source selection annunciator is required. The following
indicators and indicator/switches are suitable for source selection annunciation:
Manufacturer
Staco Switch 992561-1241762200
Staco Switch 992561-1241862200
Vivisun 95-40-17-B6-63816
Vivisun 95-45-11-B6-63816
NAT LL08-009
Mid-Continent MD41-1748
MD41-1748(5V)
MD41-1758
MD41-1758(5V)
MD41-1744
MD41-1754
Vendor Contact Information (provided for convenience only):
•
Staco Switch, 1139 Baker Street Costa Mesa, CA 92626 USA, ph (714) 549-3041.
•
Vivisun Aerospace Optics, 3201 Sandy Lane Fort Worth, Texas 76112, ph 1-888-VIVISUN.
•
Northern Airborne Technology Ltd. (NAT), #14-1925 Kirschner Road, Kelowna, BC, Canada,
ph (250) 763-2232.
•
Mid-Continent Instrument Co Inc., 9400 E. 34
GNS 480 (CNX80) Installation Manual
OPTIONAL ACCESSORIES NOT SUPPLIED
S
OURCE ELECTION
Part Number Type
Indicator
Indicator
Indicator
Indicator/
Switch
Indicator
Indicator/
Switch
560-0982-01 Rev L
Appendix F – Optional Accessories Not Supplied
A
NNUNCIATORS
14VDC Indicator
28VDC Indicator
28VDC Indicator (can be converted to 14VDC
operation by replacing qty 4 28VDC lamps with
14VDC lamps P/N 14-113).
28VDC Indicator with momentary switch (can be
converted to 14VDC operation by replacing qty 4
28VDC lamps with 14VDC lamps P/N 14-113).
28VDC Indicator (can be converted to 14VDC
operation by replacing qty 2 28VDC lamps P/N 388
with 14VDC lamps P/N 386).
Both 14VDC and 28VDC indicators with momentary
switches for remote CDI selection and suspend.
th Street N., Wichita, KS 67226, ph (316) 630-0101
Notes
F-1