Vivotek IP8152 User Manual page 191

8.14 ePTZ Preset Locations (capability.eptz > 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
addpos <Text string less than
40 characters>
delpos <Text string less than
40 characters>
return <return page>
8.15 IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
method addallow
DESCRIPTION
Channel of the video source.
Stream.
Add one preset location to the preset list.
Delete preset location from the preset list.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according to the current path.
DESCRIPTION
Add allowed IP address range to the server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from the index position.
70
VIVOTEK
User's Manual - 191