Vivotek IP8152 User Manual page 113

VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure other motion detection settings for a different time period within a day, please
click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion
detection windows can be configured on this page as well.
Video(TCP-AV)
2010/12/10 17:08:56
corridor
Please follow the steps beolw to set up a profile and additional motion detectio windows in it:
1� Create a new motion detection window�
2� Check Enable this profile�
3� Select the applicable span of time in Day, Night, or the Schedule mode� Please manually enter a time
range if you choose Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event Settings page� You can go to Event
> Event settings > Trigger to configure it as a trigger source� Please refer to page 117 for detailed
information�
User's Manual - 113