Vivotek IP8152 User Manual page 16

VIVOTEK
NOTE:
If you prefer other lens for your IP8152, please notice the specifications below.
1. If you select a different lens, the distance between the flange of the lens and the IR cut
filter on the camera should be smaller than 7.5mm. If the lens protrudes too much from
the bottom of the lens module, it may hit the IR Cut Filter, or result in out of focus when
adjusting the focus controller�
2� A vari-focal lens may protrude from the bottom of screw mount when tuning the focus
puller�
IR Cut
Filter
3� Use the included hex wrench to make adjustments to CS-mount ring only when you
experience compatibility issue with lens focal length�
16 - User's Manual
mm
Lens
protrudes
from the
screw mount
Screw mount