Care And Maintenance; Important Safety Instructions - Kodak EASYSHARE C763 User Manual

Appendix

Care and maintenance

■ If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
■
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
For digital camera disposal or recycling information, contact your local authorities.
■
In the US, visit the Electronics Industry Alliance Web site at
www.kodak.com/go/c763support

Important safety instructions

CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. Kodak AC adapters
and battery chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result
in exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
■ The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit www.kodak/go/accessories.
Use only a USB-certified computer equipped with a current-limiting motherboard.
■
Contact your computer manufacturer if you have questions.
■ If using this product in an airplane, observe all instructions of the airline.
When removing the battery, allow it to cool; it may be hot.
■
■ Follow all warnings and instructions supplied by the battery manufacturer.
46
www.eiae.org
www.kodak.com/go/support
or