Bluetooth Status Indications; Installing The Microphone (Xav-62Bt Only); Pairing; Searching From This Unit - Sony XAV-62BT Operating Instructions Manual

Av center
Hide thumbs Also See for XAV-62BT:
Table of Contents

Advertisement

For details on the compatibility of your device,
visit the support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
Bluetooth status indications
Bluetooth status indications
0
None: Bluetooth signal is off.
Lit: Bluetooth signal is on.
None: No device is connected for
0'
audio streaming.
Flashing: Connection is in progress.
Lit: A device is connected.
None: No cellular phone is connected
~
for handsfree calling.
Flashing: Connection is in progress.
Lit: A cellular phone is connected.
'T.IIII
Indicates the signal strength status of
the connected cellular phone.
llnlll!
Indicates the remaining battery status
of the connected cellular phone.
Installing the microphone (XAV-
62BT only)
To capture your voice during handsfree calling,
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied "Installation/Connections"
guide.
Pairing
Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.). *1
To pair this unit to a Bluetooth device, you need
to enter the same passkey*2 on this unit and on
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
*
I If
you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called "passcode," "PIN code,"
"PIN number," "password," etc., depending on the
Bluetooth device.
.
Tip
You can pair up to
9
devices.
Searching from this unit
Check that the other Bluetooth device
discoverable (set to allow for searching)
beforehand.
1
Select the Bluetooth source.
To select Bluetooth Phone, press
(TOP),
then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
continue to next page--+
..
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xav-622

Table of Contents