Input Side Connections - Technics SH-MZ1200 Operating Instructions Manual

Connections

Input side connections

Connect the DJ mixer and various equipment with stereo phono cables,
control cables and connection cables (Each sold separately).
Connect the AC mains lead after completing all the other
connections.
The power cord inlet for this unit (AC IN
the rear panel. It is designed to be connected vertically.
Connect only as shown in the illustration.
Direct drive digital turntable 2
Rear panel
AC mains lead
(Included)
Household
mains socket
Grounding
wire
Turntable 3 (Not included)
For the United Kingdom:
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
Note
It is not necessary to connect a grounding wire if there is no grounding terminal or grounding wire on the turntable.
8
RQT7231
), is on the left side of
(Not included)
CD player 2 (Not included)
Control cable
(Not included)
Type: 3.5 mm
stereo
Connect for use with
the fader start function
( page 13)
Turntable 2 (Not included)
Connection to the SH-MZ1200 rear panel PLAYER
CONTROL terminal
Only the separately sold direct drive digital turntable can be
operated.
Connecting to control terminals of other manufacturer's products
may result in incorrect operation or other equipment problems.
CD player 1 (Not included)
Control cable
(Not included)
Type: 3.5 mm
stereo
Type:
6.3 mm monaural
Connection cable (Not included)
Type: RCA coaxial
Connection cable (Not included)
Type: RCA coaxial
Turntable 1 (Not included)
Direct drive digital turntable 1
(Not included)
Microphone 2
(Not included)
Microphone 1
(Not included)
Direct drive digital turntable
(Not included)
Direct drive digital turntable
(Not included)
Cassette deck (Not included)