Installing The Display Panel; Removing The Camera - Dell Latitude E5440 Owner's Manual

Hide thumbs Also See for Latitude E5440:
Table of Contents

Advertisement

a. Lift the mylar tape and disconnect the low-voltage differential signaling (LVDS) cable from the
back of the display panel.
b. Remove the display panel from the display assembly.

Installing the Display Panel

1.
Place the display panel to the display assembly.
2.
Align the display panel in its original position.
3.
Connect the low-voltage differential signaling (LVDS) cable to the display panel and attach the tape.
4.
Flip the display panel over and tighten the screws to secure the display panel.
5.
Install:
a. display bezel
b. battery
6.
Follow the procedures in After Working Inside Your Computer.

Removing the Camera

1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a. battery
b. display bezel
3.
Perform the following steps:
a. Remove the screw that secures the camera and microphone module.
b. Disconnect the camera cable.
c. Lift and remove the camera and microphone module.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents