Kodak DC240 User Manual page 83

Camera
Problem
Pictures remaining number
does not decrease after
taking a picture.
Picture is not clear.
Picture is tinted green, blue,
or red-orange.
Cause
The image
Resolution and
Quality settings
does not take up
sufficient space to
decrease the picture
remaining number.
The lens is dirty.
Subject too close
when taking picture
Subject or the
camera moved
while the picture
was taken.
The subject is too far
away for the flash to
be effective.
The Sharpness
setting may be set
incorrectly.
The White Balance
setting is set
incorrectly.
Solution
The camera is
operating normally.
Continue taking
pictures.
Clean the lens. See
page 90.
Stand at least .82 ft
(.25m) in wide
angle, 1.6 ft (.5m) in
telephoto.
Hold camera steady
until the picture is
taken.
Move so the subject
is less than 13 ft
(4.0 m) away.
Change the
Sharpness setting to
Standard.
See page 30.
Change the White
Balance setting to
Auto. See page 27.
Check the White
Balance default
setting. See page 52.
77
8