Kodak DC240 User Manual page 80

Camera
Problem
SHUTTER button does not
work.
Camera does not turn on.
74
Cause
Camera is not
turned on.
Mode dial is not set
to Capture.
Ready light is
blinking. Camera is
processing picture.
The Status Display
reads Full. The
camera memory
card is full.
Batteries are not
properly installed.
Batteries are low or
dead.
Solution
Turn on the camera.
See page 2.
Set the Mode dial to
Capture.
Wait until Ready
light stops blinking
before attempting to
take another picture.
Transfer pictures to
your computer,
delete pictures on
the card (see page
39), or insert a card
with available
memory
(see page 6).
Remove and
reinstall the
batteries. See page 2.
Batteries need to be
replaced (see page
2), or recharged (see
page 4).