Kodak DIGITAL SCIENCE DC200 User Manual page 47

You are now ready to run the newly installed software. Detailed information on
KODAK DC200/DC210 Mounter Software (chapter 7) and TWAIN Software
(chapter 8) are included in this user manual. Instruction manuals for the
additional software packages that were installed are included in the camera
package.
When using DC200/DC210 software, if your computer does not recognize that
the camera is attached and turned on, you may need to adjust the serial port and
speed settings. Use the software's Preferences or Properties window to adjust the
camera communications settings.
9
Verify the settings and then
click on the NEXT button.
A progress screen appears
while the software is
installed.
10
Select the preferred restart
option and click on the
FINISH button.
If you have installed
the KODAK DC200/
DC210 Mounter
Software you must
restart your computer.
5
5-3