Camera Screen Messages - Kodak CX7525 User Manual

Troubleshooting
Problem Cause
Picture is too Flash is not on, or the
dark or subject was too far
underexposed. away for the flash to
be effective.
Auto exposure was
not achieved.
Not enough light.
Memory card Image storage is full. Insert a new card
full
The maximum
number of files or
folders is reached (or
other directory
concern).

Camera screen messages

Message
No images to display
Memory card requires
formatting
Memory card cannot be
read (Please format memory
card or insert another
memory card)
Only one USB connection
allowed
Disconnect cable or remove
camera from dock
No memory card (Files not
copied)
44
Solution
Move so there is no more than 11.8 ft
(3.6 m) between the camera and the subject;
6.9 ft (2.1 m) in Telephoto.
To take the best possible pictures, press the
Shutter button halfway and hold. When
the ready light glows green, press the Shutter
button the rest of the way down to take
the picture.
Increase Exposure Compensation
(page 38), or delete pictures
Transfer pictures and videos to the computer,
then format the card or internal memory
(page 22).
Caution: Formatting a card deletes all
pictures and videos, including protected files.
Cause
There are no pictures
in the current image
storage location.
The card is corrupted
or formatted from
another digital
camera.
USB cable is
connected to the
camera while the
camera is in a dock.
There is no card in the
camera. Pictures were
not copied.
(page 7), transfer pictures
Solution
Change image storage location
setting (page 20).
Insert a new card or format the
card (page 22).
Caution: Formatting deletes all
pictures and videos, including
protected files.
Unplug the USB cable from the
camera.
Insert a card (page
www.kodak.com/go/support
(page 18).
(page 25).
7).