Setting The Orientation Sensor - Kodak CX6230 User Manual

Setting the Orientation Sensor

If you rotate the camera to take a picture (for example, a portrait shot), the
Orientation Sensor reorients the picture so that it is displayed correct side up.
The Orientation Sensor is turned on as the default. You can turn it off so that
pictures are not rotated.
NOTE: When your subject is above or below you (such as pictures of an object
in the sky, on the ground, or when pointing down at small objects on a
table), turn off the Orientation Sensor so that pictures are not
rotated unnecessarily.
1 In any Still mode, press the Menu button.
2
Press
OK button.
34
Chapter 2
to highlight the Orientation Sensor icon
3 Highlight On or Off, then press the OK
button.
4
Press the Menu button to exit the menu.
This setting remains until you change it.
, then press the