Kodak EasyShare CX6445 User Manual page 96

Problem
Picture is too
light.
In Review mode,
a blue screen is
displayed instead
of a picture.
Stored pictures
are damaged.
84
Chapter 10
Cause
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
The light sensor is
covered.
Too much light.
Auto exposure was not
achieved.
The picture has no
thumbnail or an
unrecognized
thumbnail.
The card was removed
when the ready light
was blinking.
Solution
(page 21).
Move so there is at least 1.6 ft (0.5
m) in Wide; 2.5 ft. (0.75 m) in
Tele between camera and subject.
Hold the camera so your hands or
other objects do not cover the light
sensor.
Decrease Exposure Compensation
(page 27).
To take the best possible pictures,
press the Shutter button
half-way and hold. When the
ready light glows green, press the
Shutter button the rest of the
way down to take the picture.
Transfer the picture to the
computer (page 69), or delete the
picture (page 47).
Make sure the ready light is not
blinking before removing the card.