Viewing The Switch's Current Authentication Configuration; Viewing The Switch's Current Tacacs+ Configuration; Configuration - HP procurve switch 2650 Access Security Manual

TACACS+ Authentication
Configuring TACACS+ on the Switch
This example shows the default authentication configuration.
Figure 2-2. Example Listing of the Switch's Authentication Configuration
First-Choice
TACACS+ Server
Second-Choice
TACACS+ Server
Third-Choice
TACACS+ Server
Figure 2-3. Example of the Switch's TACACS+ Configuration Listing
2-10
Viewing the Switch's Current Authentication

Configuration

This command lists the number of login attempts the switch allows in a single
login session, and the primary/secondary access methods configured for each
type of access.
Syntax: show authentication

Viewing the Switch's Current TACACS+ Configuration

This command lists the timeout period, encryption key, and the IP addresses
of the first-choice and backup TACACS+ servers the switch can contact.
show tacacs
Syntax:
For example, if the switch was configured for a first-choice and two backup
TACACS+ server addresses, the default timeout period, and paris-1 for a
(global) encryption key, show tacacs would produce a listing similar to the
following:
Configuration for login and enable access
to the switch through the switch console
port.
Configuration for login and enable access
to the switch through Telnet.