DigiTech Polara Owner's Manual page 5

4. Decay Knob
Controls the length of time it takes for the reverb to fade out.
5. Input 1 (Mono)
Connect your instrument, the output of a pedal, or an amp effects send to this jack. Signals are
heard at both outputs when only the Input 1 (Mono) jack is used.
6. Indicator LED
Lights when the effect is turned on.
7. Input 2
Connect a second input to this jack for stereo operation. Inputs 1 and 2 are processed separately
through the Stereo Reverb effect then fed to Outputs 1 and 2 keeping true stereo separation
between channels.
8. Foot Switch
Turns the effect on and off.
9. Output 2
Connect this output to the input of a second guitar amplifier when a second amp is being used.
10. Output 1 (Mono)
Connect this output to the input of a single guitar amplifier or amp effects return.
11. Liveliness Knob
Controls the amount of high frequency response in the Reverb's effect signal.
12. Level Knob
Controls the reverb level.
3