Serial Data Collection and Global Positioning System
Setting the Baud Rate
Global Positioning System
Requirements for Using
the GPS Feature
15-4
Before transmitting data between the camera and a connected device, you
must set the baud rate required by the device.
NOTE: Follow the device manufacturer's recommendations for baud rate.
1. Choose Serial Port from the Tools menu, then choose Baud Rate.
2. Select the required baud rate.
Your camera has a Global Positioning System (GPS) feature which receives
GPS data from a connected GPS unit and writes information about the
current camera location to the image header.
To use the GPS feature on your camera, you need the following:
• GPS unit that supports standard NMEA data transfer
• GPS serial cable (from vendor supplying GPS units)
• RS232 3.5 mm cable to connect to the camera
April 28, 2004