Set Mode; Entering Set Mode; Set Mode Items - Icom IC-M59euro Instruction Manual

5

SET MODE

Entering SET mode

SET mode is used to customize operation of the transceiver
to suit your operating needs.
D To enter SET mode:
While pushing [16], turn power ON.
• Keep pushing [16] until the initial SET mode display appears.
• SET mode is selected.
To exit SET mode, turn power OFF then ON again.
D To select an item:
There are up to 5 items in SET mode (depending on options
installed) that may be adjusted to suit your operating needs.
Select SET mode as above.
Push [16] to select the desired item; then rotate the channel
selector to select the desired condition.
• See the following pages for details on each SET mode item.
18

SET mode items

The diagram above shows the default settings for each
SET mode item and the order of selection.
Beep tones
Normal/priority
scan
Scan timer
When UX-120 is installed.
Auto acknowledge
contents
When UT-79 is installed.
Scramble code