Unloading The Film; Automatic Rewind; Mid-Roll Change (Mrc) - Kodak ADVANTIX 5800MRX Owner's Manual

Unloading the Film

Automatic rewind

The camera automatically rewinds the film into
the cassette after the last exposure.
1. Wait for the film to completely rewind into
the film cassette.
• The -
TEXT MESSAGING PANEL
display "FILM REWINDING" and the
FRAME COUNTER
to "0." When the motor stops running,
the text-messaging panel will display
"REMOVE FILM."
2. Turn the camera
upside down and
slide the -
FILM DOOR
(17) to open the
LATCH
(18) and to
FILM DOOR
partway eject the film.
(30) will
(31) will count down
E N
O P
F T
L E
P
E X
3. Remove the film cassette from the
camera and reload with new
KODAK ADVANTIX Film.
• The FSI on the fully-exposed film
cassette will be at

Mid-roll change (MRC)

This camera has MRC feature where a
partially exposed film cassette can be
rewound for later use. The FSI on a partially
exposed film cassette will be set to
(#2 position). When you reload the film
cassette into the camera, the camera will
automatically advance the film to the first
unexposed frame. Film can be rewound and
reloaded until the last frame is taken. The
camera will automatically rewind the film and
set the FSI to (#3 position).
1. Gently press the
by using a pointed object to start the auto-
film rewind.
2. Wait for the film to completely rewind into
the film cassette.
(#3 position).
-
FILM REWIND BUTTON
(21)
27