Handling Error Messages - Canon PIXMA iP90 Quick Start Manual

Hide thumbs Also See for PIXMA iP90:
Table of Contents

Advertisement

Troubleshooting

Handling Error Messages

When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes
indicates the type of error that has occurred. Count the flashes and then take appropriate
action to correct the error.
Number of
Possible Cause
Flashes
Two flashes
Printer is out of
paper
Three flashes
Paper jam
Four flashes
Ink tanks installed
incorrectly
Five flashes
No Print Head
installed/Defective
Print Head
Eight flashes
Waste ink absorber*
almost full
Nine flashes
A specified period
of time has lapsed
without receiving
any response from a
digital camera/The
digital camera or
digital video
camcorder is not
compatible with this
printer
Twelve flashes
Low battery level
* The waste ink absorber absorbs ink used during cleaning.
76
Downloaded from ManualsPrinter.com Manuals
Reload paper and press the RESUME/CANCEL button.
If a paper jam occurs, clear the jammed paper, reload paper in the printer, then
press the RESUME/CANCEL button. See
Reinstall the ink tanks. Ensure that the tanks are firmly seated in the Print Head.
Install a Print Head correctly. Press the POWER button to turn off the printer, and
press the POWER button again to turn on the printer. If the same error occurs, the
Print Head may be defective. Contact the Customer Care Center.
The printer has a built-in waste ink absorber to hold the ink consumed during Print
Head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the RESUME/CANCEL button to clear the error so printing can continue.
Contact the Customer Care Center.
Disconnect the cable, press the RESUME/CANCEL button, and then connect the
cable again.
If the error persists, the connected digital camera or digital video camcorder may
be incompatible with this printer. Use a compatible digital camera or digital video
camcorder.
Follow the procedure below.
1. Turn off the printer.
2. Connect the supplied Universal AC Adapter or load a charged battery.
3. Turn on the printer.
Note
For details on handling of the battery, refer to the
User's Guide
Try This
"Paper Jams"
on page 75.
.
LK-51B/CK-51B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents