Canon PIXMA iP90 Quick Start Manual page 84

Troubleshooting
Problem
Low Ink Warning Failure to reset ink
Accompanied by Ink counter when
Tank Icon With a '?' installing new ink
tank
80
Downloaded from ManualsPrinter.com Manuals
Possible Cause
The ink tank level accompanied by the ink tank icon with the "?" indicates ink
tank is not synchronized with its ink counter.
Always be sure to reset the ink counter in your printer driver when you replace an
ink tank. See
Note
Try This
"Resetting the Ink Counter"
A "?" is displayed next to the Ink counter between the time one
ink tank is removed and the ink counter is reset when the next
one is installed. When you want to suspend the ink replacing
message and "?", change a setup in accordance with the
following process.
1. Ensure that the printer is turned on.
2. Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from
the Start Menu" on page 29
3. Click the Maintenance tab and then click Low Ink Warning
Setting icon.
4. Clear a check box of Display low ink warning off and click
Send.
5. When the confirmation message is displayed, click OK.
1. Ensure that the printer is connected with the computer by USB
cable.
2. Ensure that the printer is turned on.
3. Double-click the hard disk icon where the printer driver was
installed, the Applications folder, and then the Utilities folder.
4. Double-click the Printer Setup Utility icon.
If you are using an OS other than Mac OS X v.10.3, double-
click the Print Center icon.
5. Select iP90 from the Name list and click Utility or Configure.
6. Select iP90 from the Product list and click Maintenance.
7. Select Remaining ink level setting from the pop-up menu.
8. Clear the check box of Display the Remaining Ink Level and
click Send.
9. When the confirmation message is displayed, click OK.
on page 64.