Behringer TUBE ULTRAGAIN MIC200  User Manual page 12

TUBE ULTRAGAIN MIC200
System specifications
Frequency response
Function controls
Gain
Output
Preamp mode control
Function switches
20 dB pad
+48 V
Low Cut
Phase reverse
Indicators
Input level
Power-LED
Power supply
Mains voltage
Mains supply
Physical Dimensions
Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products
without prior notice. Specifications and appearance may differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The
information contained herein is correct at the time of printing. The names of companies,
institutions or publications pictured or mentioned and their respective logos are
registered trademarks of their respective owners. Their use neither constitutes a claim of
the trademarks by BEHRINGER
BEHRINGER . BEHRINGER
®
any person who relies either wholly or in part upon any description, photograph or
statement contained herein. Colors and specifications depicted may vary slightly from
product. No part of this book may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHRINGER Spezielle
Studiotechnik GmbH. BEHRINGER
ALL RIGHTS RESERVED. © 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
12
Mic input <10 Hz - 47 kHz (+/-3 dB)
Line input <10 Hz - 55 kHz (+/-3 dB)
variable (+26 to +60 dB)
variable (-o o to +10 dB)
Selection of various preamp settings for
microphone and instruments
Level attenuation (20 dB)
Activates the phantom power
High pass filter (cut-off frequency 90 Hz)
Reverses phase (180 degrees)
8-segment LED meter: -24, -18, -12, -6, 0, +6, +12,
clip
Indicates operation
USA/Canada
U.K./Australia
Europe
Japan
external power supply 9 V AC/1300 mA
approx. 2 1/2" (64 mm) x 5 1/4" (135 mm)
x 5 1/4" (135 mm)
approx. 1.1 lbs (0.5 kg) (w/o power supply)
nor affiliation of the trademark owners with
®
accepts no liability for any loss which may be suffered by
®
47877 Willich-Münchheide II, Germany
6. SPECIFICATIONS
120 V~, 60 Hz
240 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz
is a registered trademark.
®