Technical Specifications; Conformity Certificates - Husqvarna 390 Operator's Manual

Weight and Dimensions 390
Weight
Operating weight
Length (Handle not installed)
Width
Height
Blade
Material cut
Blade type
Blade rotation
Blade shaft speed
Cutting depth
Cutting distance from wall
Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.
Soft aggregates
Medium aggregates
Hard aggregates
Blades are available in 5.0 inch (127 mm) and 5.5 inch (140 mm) diameters and in 0.095 inch (2.4 mm),
and 0.225 inch (5.7 mm) widths
Motor Specification:
CALIFORNIA AIR RESOURCES BOARD (CARB): CARB standards do not apply to this machine.
For more information see the website http://www.arb.ca.gov

TECHNICAL SPECIFICATIONS

CONFORMITY CERTIFICATES

27 lbs
30 lbs
30 inch
15 inch
11 inch
Green concrete only
5.5 inch (140 mm) dry cut diamond blade with tri-arbor
Counter clockwise, upcutting
6850 rpm
7/8 to 1 1/18 inch (22 to 28.5 mm) depending on amount of
blade wear
2.0 inch (51 mm)
10 ft/min
6.0 ft/min
3.0 ft/min
15 Amp, 60 hertz single phase, 120V Air cooled, universal
electric motor with gear reduction
13
12 kg
14 kg
762 mm
381 mm
279 mm
3.0 m/min
1.8 m/min
0.9 m/min