Table of Contents
Advertisement
7
Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not
turn on/off or function
LCD is too dark.
Short battery life
Flash does not fire
Memory card is almost
or entirely full
You cannot take a
picture
Pictures remaining
number does not
decrease after taking a
picture
www.kodak.com/go/support
Solution
■
Make sure the battery is charged and installed correctly
page
1).
■
Adjust the LCD Brightness setting in the Settings menu
page
40).
■
Make sure the battery is charged
■
Limit the time you review pictures/videos on the camera LCD.
■
Purchase a spare battery at www.kodak.com/go/accessories.
■
The flash does not fire in all modes. Change modes as needed
(see page
13).
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert a new/charged battery
■
Memory is full. Transfer pictures to the computer
delete pictures
(see page
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
(see page
1).
(see page
(see page
21) or insert a new card.
(see page
(see page
1).
21), or insert another card.
(see
(see
42).
7).
(see page
42),
45
Advertisement
Table of Contents
