Table of Contents
Advertisement
Troubleshooting
Status
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Computer does not
communicate with
the camera
Direct printing (PICTBRIDGE enabled Printer) problems
Status
Cannot print
46
Solution
■
Card may be corrupted. Format the card in the camera
page
41).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
Turn off the camera, then turn it back on.
■
Make sure the battery is charged and installed correctly
page
1).
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Downloads at
www.kodak.com/go/camerasw.
Solution
■
The camera must be in PTP (not mass storage) mode. Change the
Computer Connection setting (in the Settings menu) to Other
Application
(see page
40).
www.kodak.com/go/support
(see
see page
19.
(see
(see page
42). Then
Advertisement
Table of Contents
