Troubleshooting
Status
Battery life is short
You cannot take a
picture
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Slide Show does not
run on an external
display device
Computer does not
communicate with
the camera
41
Solution
■
Make sure the correct battery type is installed
■
Wipe the battery's contacts with a clean, dry cloth before
inserting it in the camera.
■
Make sure the batteries have power and are installed correctly
(see page
1).
■
Limit the time you review pictures/videos on the camera LCD.
■
Purchase a spare battery at www.kodak.com/go/accessories.
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Make sure the batteries have power and are installed correctly
(see page
1).
■
Memory is full. Transfer pictures to the computer
delete pictures
■
To view pictures on a card or in internal memory,
Solution
■
Adjust the camera Video Out setting to NTSC or PAL
page
34).
■
Make sure the external device settings are correct. (See the
device's user guide.)
■
Turn off the camera, then turn it back on.
■
Make sure the batteries have power and are installed correctly
(see page
1).
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Help at www.kodak.com/go/camerasw.
(see page
20), or insert another card.
www.kodak.com/go/support
(see page
48).
(see page
4).
(see page
see page
(see
(see page
36). Then
36),
19.