Kodak DVC325 User Manual page 28

No image appears There is not enough
or the image is band-width available for
just a mix of the USB bus to transfer
colors. video data without
errors.
The response to There is not enough
the application band-width available for
picture selection the USB bus to transfer
during a capture is video data without
slow. errors.
or
You lose the
camera
communication
during the use of
the application.
The video appears The CPU in the
to be "dropping" computer is not powerful
or losing frames. enough for the selected
camera mode.
1
Double-click the System icon on
the Control Panel.
2
Click the Performance tab.
3
Click the Graphics button.
4
Move the Hardware
Acceleration slider to the left to
reduce the amount of acceleration.
5
Reboot the computer and try the
camera again.
You may also want to contact your
PCI card manufacturer to verify that
you have the latest driver for the card
and that the card is fully Windows 95
or Windows 98 compliant.
1
Double-click the System icon on
the Control Panel.
2
Click the Performance tab.
3
Click the Graphics button.
4
Move the Hardware
Acceleration slider to the left to
reduce the amount of acceleration.
5
Reboot the computer and try the
camera again.
You may also want to contact the PCI
card manufacturer to verify that you
have the latest driver for the card and
that the card is fully Windows 95 or
Windows 98 compliant.
Change to a lower frame rate.
or
Close some software applications to
free up memory and CPU power.
24