Troubleshooting And Maintenance; Troubleshooting - Kodak DVC325 User Manual

Troubleshooting

If you are having problems with your KODAK DVC325 Digital Video Camera,
or are having trouble viewing images from your DVC325, refer to the following
table for possible solutions.
Problem Cause
The camera is not No power is coming to
capturing any the USB port.
images.
The camera is not fully
plugged into the USB
port.
The computer does not
detect the camera.
The wrong USB driver
software is installed on
your computer.
The USB port is not
enabled.
Troubleshooting
and Maintenance
Solution
Refer to the manual for your specific
computer. Run the System Setup for
the computer immediately after a
restart and verify that the USB port is
enabled. If you are uncertain how to
do this, please contact the computer
manufacturer.
Unplug the camera and then plug it
in again.
or
Reboot the computer with the
camera plugged in.
Unplug the camera and plug it in
again.
or
Reboot the computer with the
camera plugged in.
Contact the manufacturer of the
computer to obtain the proper or the
updated USB driver software.
Refer to the manual for your specific
computer. Run the System Setup for
the computer immediately after a
restart and verify that the USB port is
enabled. If you are uncertain how to
do this, please contact the computer
manufacturer.
21