Rinse Hold; Soiling Level Selection - Beko WMB 81466 User Manual

C
Rinse Hold option is indicated with "ı_ı" symbol and No
Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after
the programme completes, you can use Rinse Hold function
in order to prevent them from getting wrinkled when there is
no water in the machine.
This function holds the laundry in the final rinsing water.

Rinse Hold

If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed .
- Press Start / Pause / Cancel button. The programme
resumes. Machine discharges the water and spins the
laundry.
If you want to discharge the water at the end of the
programme without spinning, use No Spin function.
No Spin
C
Frame of the Spin Speed indicator is off in the
programmes that do not allow the adjustment of
spin speed. When you press the
Adjustment
button, "Unadjustable" appears on the
display.
You can also change the Spin Speed after the washing
starts. If the Spin Speed indicator's frame is illuminated
after the wash cycle has started, you can select the desired
spin speed. If the wash cycle has reached a point where
you cannot change the spin speed, the frame of spin speed
indicator turns off.

4.10 Soiling level selection

Whenever a new programme is selected, the soiling level
recommended for that programme appears on the Soiling
Level indicator. To change the soiling level, press the Soiling
Level Adjustment button.
C
Soiling Level Adjustment button only serves for
decreasing the soiling level.
Single line means "lightly soiled", double lines "moderately
soiled", and three lines "heavily soiled".
36 / EN
Spin Speed
C
If the user attempts to select a soiling level, which is not
suitable for the selected programme, "Unadjustable"
appears on the display.
Washing Machine / User's Manual