Panasonic PP103910 Operating Instructions Manual page 22

Troubleshooting (continued)
No sound from speaker(s)
The speaker channels are
reversed between
right and left.
The sound field is not clear
in the stereo mode. Central
sound does not settled.
The power fails
unintentionally.
Clock time is reset.
Radio
Poor reception or noise
The number of auto preset
stations is less than 6.
22
BALANCE/FADER setting is not appropriate.
a Readjust BALANCE/FADER.
There is a break, a short circuit, poor contact or wrong wiring
regarding the speaker wiring.
aCheck the speaker wiring.
The speaker wiring is confused between right and left.
aPerform the speaker wiring in accordance with the wiring dia-
gram.
The plus and minus terminals at right and left channels of speakers
are connected reversely.
aPerform the speaker wiring in accordance with the wiring dia-
gram.
The safety device works.
a Consult your dealership.
Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always active.
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are
correct. In addition, check to see whether the antenna ground is
securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film
antenna, etc.).
aCheck the wiring of the antenna battery lead.
The number of receivable stations is less than 6.
a
Move to an area where receivable stations number is maxi-
mum, and try presetting.