General - Panasonic PP103910 Operating Instructions Manual

General

Source selection
The source changes as follows every time
Power
Turn the key in the ignition until the accessory indi-
cator lights.
Power on: Press [SRC](PWR).
Power off: Hold down [SRC](PWR) for more than
1 second.
One-Hour Timer
With the ignition off, pressing the [PWR](Power)
on this unit will turn on the receiver and activate the
receiver's one-hour timer. The receiver will turn off
automatically after one hour.
Mute
Press [MUTE] to mute the sound completely.
Press [MUTE] again to cancel.
10
[SRC]
(Source) is pressed.
Radio
FM, AM, WB
(a page 12)
Disc player
CD, MP3/WMA
(a page 14)
USB
MP3/WMA
(a page 16)
AUX1
When device connected
to the front AUX
terminal of this unit
AUX2
When device connected
to the rear AUX terminal
of this unit
Volume
Turn the knob clockwise to increase volume, and coun-
terclockwise to decrease volume.
Volume level (0 to 40) (default:18)
Indication at connecting external amplifier
Note: When an anomaly of the external amplifier is
detected, "FAULT" appears (the sound will be mute/
turned off after 6 seconds.
When an external amplifier is connected, the
adjustable volume level: 0 to 33 (Maximum).
AUX (when no external device is
connected to rear AUX terminal)
When device connected to the front AUX
terminal of this unit
Notes:
• When an output signal from the rear AUX terminal is
detected, this unit automatically changes the source
to AUX2. If this unit no longer detects this input sig-
nal, the source immediately before AUX2 resumes.
• When an output signal from the rear AUX terminal is
detected in the power-off mode of this unit, the
power is turned on with the AUX2 source selected. If
this unit no longer detects this input signal before
manually selecting other sources, the power of this
unit is turned off.
Down
lights when an external amplifier is connected.
blinks repeatedly) and the power of this unit is
Up