Pioneer AVH-X7700BT/XNUC Service Manual page 58

1
EDC test mode image
A
EDC 1/2 test mode
0000 0000
(1)
Select 0 layer
0000 0000
B
1003 0000
(1)-(4)
Specify ID
0 layer : 10** ****
1 layer : 11** ****
[Note] ** **** is the ID specified value
(5)
Start EDC 1/2
C
0 layer : 20** ****
1 layer : 21** ****
[Note] ** **** is the current ID value
**** ****
[Note] **** **** is the current ID value
LD live time mode image
D
LD live time mode
0000 0000
(1)
Display CD LD
live time
10** ****
[Note] ** **** represents
CD LD live time
E
F
[Note] All live times exceeding 999999 hours are notified as 999999 hours.
[Note] The live time represented in "*E** ****" may not be an accurate
value as it represents the end of the life of the FLASH memory.
58
1
2
Legend: ... Key operation
... Operation status
... Contents displayed by the DVD mecha (only those compatible with video)
Eight letters worth of the data is transmitted to the product (to the HOST side) through the UART communication
[Note] The same image is shared in EDC1 and EDC2.
(2)
Select 1 layer
0100 0000
1103 0000
[Note] Update the display at intervals of 0.5 seconds until 0/1 layer is selected or ejected.
Legend: ... Key operation
... Operation status
... Contents displayed by the DVD mecha (only those compatible with video)
Eight letters worth of the data is transmitted to the product (to the HOST side) through the UART communication
(2)
Display DVD LD
live time
20** ****
[Note] ** **** represents
[Note] ** **** is the
DVD LD live time
(1)-(4)
Register the
[Note] ** **** represents
CD LD live time
[How to specify a set time]
Specify a digit with the commands (1) and (2). Commands (3) and (4) are to increase/decrease the number.
Determine with the command (5). Cancel with the command (8).
AVH-X7700BT/XNUC
2
3
EJECT operation
Eject
Test mode
Eject
After completion of EJECT operation
(5)
Set CD LD
live time
30** ****
[Note] ** **** is the
set time
(1)-(4)
(8)
Specify the
set time
(5)
set time
10** ****
[Note] ** **** represents
DVD LD live time
3
4
[Note] Ejecting is allowed at any time during the
EDC test mode, provided that the BD disc status
bit in the UART communication is uncertain
(6)
Set DVD LD
live time
40** ****
set time
(8)
Specify the
set time
(5)
Register the
set time
20** ****
4