Whirlpool Refrigerator Instructions For Use Manual page 15

If the appliance temperature
is too high:
If there is moisture build-up: • Make sure that air flow vents inside the compartment are not
If the doors do not open and
close properly:
Operations Alarms
In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e.g.
Failure1, Failure 2, etc...) call After-sales Service and specify the alarm code. The acoustic alarm
sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks
according to failure code described below:
Failure code
RC Set points blink on/off at 0,5 sec. Blinks ON 2 times
Error 2
then remain off for 5 seconds. Pattern repeats.
RC Set points blink on/off at 0,5 sec. Blinks ON 3 times
Error 3
then remain off for 5 seconds. Pattern repeats.
RC Set points blink on/off at 0,5 sec. Blinks ON 6 times
Error 6
then remain off for 5 seconds. Pattern repeats.
Legend: Led off
• Are the appliance controls correctly set?
• Has a large amount of food been added to the appliance?
• Check that the door is not opened too often.
• Check that the door close properly.
• Make sure that air flow vents inside the compartment are not
blocked, as this prevents the circulation of cold air.
blocked, as this prevents the circulation of air.
• Make sure that the food is properly packaged. Dry any dampness on
food containers before placing them in the appliance.
• Check that the doors are not opened too often. When the door is
opened, humidity from the room air enters the appliance. The more
often the door is opened, the faster humidity builds up, especially
when the room itself is very humid.
• If the room is very humid, it is normal for moisture to build up inside
the refrigerator.
• Check that food packages are not blocking the door.
• Check that the internal parts or automatic ice maker are not out of
position.
• Check that the door seals are not dirty or sticky.
• Ensure the appliance is level.
Led flashing
Visualization
13
x2
x3
x6