JVC MX-K1 Service Manual page 15

Removing the cassette deck main
motor, and replacing the main belts
(See Fig.21, 27 and 28)
Prior to performing the following procedures,
remove the top cover.
Also remove the CD changer unit.
Also remove the front panel assembly.
1. Remove the five screws "O" retaining the cassette
deck mechanism.
2. Remove the cassette deck mechanism.
3. Remove the two screws "T" retaining the main
motor from the front side of the cassette deck.
[Caution] After attaching the main motor, check the
orientation of the motor and the polarity of
the wires.
4. From the backside of the cassette deck, remove
the main motor and two main belts.
[Caution] The lengths of the cassette A (playback
only) and cassette B (record/play) main
belts are different. When attaching the
main belts, use the longer belt for
cassette A.
Removing the leaf switches of the
cassette deck mechanism
Prior to performing the following procedures,
remove the top cover.
Also remove the CD changer unit.
Also remove the front panel assembly.
1. Remove the five screws "O" that retain the cassette
deck mechanism.
2. Remove the cassette deck mechanism.
3. Turn the cassette deck mechanism upside down.
4. Remove the solder from around the leaf switches.
5. Pull out the leaf switches from the front side of the
cassette deck mechanism.
(See Fig.21 and 29)
Cassette deck mechanism
Fig.27
Cassette deck mechanism
(Back side)
Main belt Main belt
(For B cassette) (For A cassette)
Fig.28
Solder side of leaf switch
Cassette deck mechanism
Fig.29
(Front side)
T
Cassette deck main motor
(Back side)
MX-K1
1-15