Table of Contents
Advertisement
TG9372C(e).book Page 48 Friday, August 22, 2008 3:28 PM
Useful Information
Call Display/Talking Call Display
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
I cannot dial the phone number
edited in the caller list.
Time on the unit is shifted.
48
Cause/solution
L You need to subscribe to Call Display service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment such as a Call Display
box or cordless telephone line jack, plug the
unit directly into the wall jack.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L The name display service may not be
available in some areas. Contact your service
provider/telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
L Depending on your service
provider/telephone company, the unit may
display or announce the caller's information at
2nd ring or later.
L Move closer to the base unit.
L The handset or base unit's ringer volume is
turned off. Adjust it (page 17, 24).
L The Talking Call Display feature is turned off.
Turn it on (page 24).
L The number of rings for the answering system
is set to "2" or "Toll saver". Select a
different setting (page 37).
L If the base unit and another handset are
having an intercom call, your handset does
not announce caller information.
L The phone number you dialed might have
been edited incorrectly (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
32).
L Incorrect time information from incoming Call
Display changes the time. Set the time
adjustment to "Manual" (off) (page 24).
Advertisement
Table of Contents
