(5 Mmø X 16 Mm); Hex. Nut (5 Mm Ø); Rear Support Strap - Panasonic CQ-VD7003U Installation Manual

Method for Fixing the Mounting Spring
Two holes of the mounting spring allow you to select between two mounting types as shown below.
(A) Regular installation method
o Flat-Head Screw
Method for Fixing the Rear of the Unit
(a) Using the Rear Support Strap u.
Fire wall of car
u Rear Support Strap
t Tapping Screw
(5 mmø x 16 mm)
A few millimeters of
console projecting
o Flat-Head Screw
3 ø
mm
y Hex. Nut
(5 mmø)
r Mounting Bolt
(5 mmø)
(B) Deeper installation method
o Flat-Head Screw
Caution
¡Method (B) is not available in some types of cars.
(b) Using the Rubber Cushion (option)
Rubber Bushing
(option)
Less projecting
o Flat-Head Screw
Rear Support Bracket
(Provided on the Car)
r Mounting Bolt
(5 mmø)
CQ-VD7003U
10
11