Ford RANGER Owner's Manual page 172

Part
Coolant
Front Axles
Rear Axles
Transfer Case
Refrigerant
AC Compressor lubricant
Your engine has been designed to be used with Castrol and Ford Engine Oil, which gives
a fuel economy benefit whilst maintaining the durability of your engine.
Topping up the oil:
Engine oil - Diesel (for markets with low sulphur content less than 350 ppm): If
you are unable to find an oil that meets the specification defined in the vehicle fluids
table, you must use SAE 5W-30 that meets the specification defined by ACEA A5/B5.
Engine oil - Diesel (for markets with high sulphur content greater than 350 ppm):
If you are unable to find an oil that meets the specification defined in the vehicle fluids
table, you must use SAE 10W-30 that meets the specification defined by API CH-4.
For gasoline engines only, if you are unable to find an oil that meets the specification
defined in the vehicle fluids table, you must use SAE 5W-20 or SAE 5W-30 that meets
the specification defined by either ACEA A5/B5, API SM or API SN.
Using topping up oils other than the one specified can result in longer engine cranking
periods, reduced engine performance, reduced fuel economy and increased emission
levels.
Castrol engine oil recommended.
Ranger (TKE) Vehicles Built From: 01-10-2014, DB39120609AD (CG3575en) enGBR, Edition date: 09/2014, First Printing
Maintenance
Recommended fluid
Chevron / Arteco
Castrol
Motorcraft MERCON® LV
R134A
POLYALKYLENE GLYCOL
170
Specification
WSS-M97B44-D (XLC-
0F02)
WSP-M2C197-A
WSP-M2C197-A
WSS-M2C938-A (XT-10
QLV)
WSH-M17B19-A
WSH-M1C231-B